Large Single Lock for Outer Bund - Harlequin Older Oil Tanks (TA66)
For maximum security, fit this large single lid lock to the outer tank. By securing the large lid of the outer bund it is very difficult to gain access to the inner tank.
This lock fits e.g. the Harlequin 2700EVN. Please check that the lid on your oil tank is similar to that shown in this picture. If in any doubt, please contact us.
Materials: All Tank Arms are made from 5mm thick solid steel. The steel is zinc plated and assembled with a stainless steel tamper proof rivet, providing an anti-corrosion barrier so the arms will never rust or seize. The 2" aluminium cap is attached to the arm with a hardened steel pin, welded at both ends, to prevent removal.
Padlocks: We do not include a padlock, as some customers will have one already. However a padlock is required. We recommend the ABUS padlock.
For maximum security, fit this large single lid lock to the outer tank. By securing the large lid of the outer bund it is very difficult to gain access to the inner tank.
This lock fits e.g. the Harlequin 2700EVN. Please check that the lid on your oil tank is similar to that shown in this picture. If in any doubt, please contact us.
Materials: All Tank Arms are made from 5mm thick solid steel. The steel is zinc plated and assembled with a stainless steel tamper proof rivet, providing an anti-corrosion barrier so the arms will never rust or seize. The 2" aluminium cap is attached to the arm with a hardened steel pin, welded at both ends, to prevent removal.
Padlocks: We do not include a padlock, as some customers will have one already. However a padlock is required. We recommend the ABUS padlock.
For maximum security, fit this large single lid lock to the outer tank. By securing the large lid of the outer bund it is very difficult to gain access to the inner tank.
This lock fits e.g. the Harlequin 2700EVN. Please check that the lid on your oil tank is similar to that shown in this picture. If in any doubt, please contact us.
Materials: All Tank Arms are made from 5mm thick solid steel. The steel is zinc plated and assembled with a stainless steel tamper proof rivet, providing an anti-corrosion barrier so the arms will never rust or seize. The 2" aluminium cap is attached to the arm with a hardened steel pin, welded at both ends, to prevent removal.
Padlocks: We do not include a padlock, as some customers will have one already. However a padlock is required. We recommend the ABUS padlock.
